Stone veneer is strong, but heavy rain and flash flooding can quietly cause damage if it’s not properly protected. Have you ever wondered what’s happening behind those beautiful walls when water sneaks in? Without the right protection, your veneer could be at risk of cracking, loosening, or even more serious issues.
Prevent costly repairs by taking action today. Get in touch with the most skilled local masonry contractor in Mobile for a free consultation.
Phone: (251) 283-5661
Email: contact@mobilemasonryal.com
Simple Steps to Keep Your Veneer Safe
Here are some simple and smart ways to protect them from water damage:
1. Check Your Drainage System
Your gutters and downspouts should direct water away from the home and not let it pool around the walls. Make sure they’re clean, free from blockages, and directing water at least 3 feet from your foundation.
2. Seal It Right
Apply a high-quality water-repellent sealer for added protection. This sealer prevents moisture from penetrating the surface while still allowing the stone to “breathe.”
3. Regular Inspections
Veneers can crack or develop gaps, particularly in areas exposed to frequent sun and rain. That’s why it’s important to inspect them at least once a season. If you notice any damage, contact a masonry expert right away before it worsens.
4. Slope the Ground Away
The soil around your home should slope down and away from your walls. This will prevent the water from pooling near the base, which can weaken the surface and even affect the foundation of your home.
5. Install Flashing
Flashing is a thin barrier installed behind your stone veneer, usually at joints and corners. It helps move water out and away before it can cause harm. Flashing might sound like a job for the pros and it is.
6. Avoid Pressure Washing
It might seem like a good idea to blast away dirt, but high-pressure water can push moisture behind the surface or even loosen stones. Instead, use a soft brush and a gentle hose for cleaning.
What to Do After a Flash Flood
Here’s what to do if a flash flood occurs in your area:
- Inspect your veneer: Look for loose stones, visible cracks, or areas where water might have moved behind the surface.
- Dry things out: To reduce the humidity inside your house, use fans and dehumidifiers. It will prevent moisture from affecting indoor walls.
- Call a pro: Even if things look okay, hidden damage can show up weeks later. A professional inspection from a trusted contractor can save you from future headaches.
Don’t Wait Until the Next Storm—Act Now!
Water damage doesn’t announce itself; it creeps in silently. A few simple steps today can save you from emergency repairs in the future.
For expert installation, sealing, and repairs in Mobile, AL, trust the professionals at Mobile Masonry Contractors. They specialize in:
✅ Professional installation
✅ Expert sealing & repairs
✅ Flood-resistant drainage solutions
📞 Call: (251) 283-5661
📧 Email: contact@mobilemasonryal.com
Frequently Asked Question(s)
About every 2–3 years, or sooner if your area sees a lot of rain.
Common signs are discoloration, cracks, loose pieces, or white streaks (called efflorescence).
Yes. Flashing must be installed properly to work. It’s best to let experienced masonry contractors handle it.
No. Pressure washing can damage the surface and force water behind the surface.
Spring and fall are ideal. You’ll spot any winter damage and prepare for heavy summer rains.
